UNIVERSAL TESTING MACHINE - SI-UTM-100


TECHNICAL SPECIFICATION

à BASIC UNIT :

  • § Dual column floor mounted electromechanical testing system.
  • § Able to perform the experiments for the following loading conditions (1) Tension (2) Compression (3)

Bending.

  • § The stiffness of the frame will be high (> 275 kN/mm) enough to test various classes of materials

(Polymers to Ceramics).

  • § The column length will be high enough to mount a high-temperature furnace and an oven to facilitate

sub-zero and high-temperature experiments.

  • § The data acquisition rate are equal to 5 kHz.
  • § The unit will be provided with safety and security features so as to avoid damage to the operator and

machine.

  • § Two guide rods are equipped for move cross head up and down with ball screw.
  • § Continuous operation - 1000 cycles.
  • § PC communication - LAN.

à LOAD CELL :

  • § Load Cell Set 100 kN Class 0.5 1/1000
  • § within ± 0.5% of the displayed test force for 1/100 to 1/1000 of the load cell capacity.
  • § within ± 0.3 % error of the indicated test force in the range of 1/100 to 1/1 of the load cell capacity.
  • § Compatible with JIS 87721 Class 0.5, EN 10002-2 Grade 0.5, ISO 7500-1 Class 0.5, BS 1610 Class

0.5, DIN 51221 Class 0.5, and ASTM E4.

à FIXTURES AND GRIPS :

  • § Fixtures and Grips will be provided to perform Tension, Compression and Bending tests at Room

temperature and High temperatures.

  • § Tensile grips will be provided to test both flat and rounded cross-sectional samples.
  • § Wedge grips capable for holding flat samples with thickness from 0.1 to 12 mm at temperature .Product-box{ border: 1px solid #EAECEE; border-radius: 5px; margin-bottom: 20px; }