| MODEL |
SI-CG-150 |
| Centre height In mm |
150 |
| Max distance between centre in mm |
700 |
| Max grinding length in mm |
700 |
| Max diameter ground in mm |
250 |
| Table speed min / max |
300-4500mm/min |
| Maximum swivel of table |
6° – 10° |
| Grinding wheel diameter in mm |
350 - 400 |
| Grinding wheel width in mm |
30-400 |
| Grinding wheel bore in mm |
75 |
| Speed of grinding wheel in RPM |
2000 |
| Swivel angle Towards work head |
60º |
| Swivel angle Towards tailstock |
45º |
| Speed of work head spindle in RPM |
60-250 |
| Spindle Taper |
MT-3 |
| Swivel angle Towards wheel |
90º |
| Swivel angle Away from the wheel |
30º |
| Tail stock Taper |
MT-3 |
| Grinding diameter in mm |
15-1000 |
| Maximum grinding depth in mm |
70-80 |
| Spindle speed in RPM |
10000 |
| Wheel head motor |
3 HP, 3 ph/AC |
| Work head motor |
0.5 Hp 3 ph /AC |
| Hydraulic pump motor |
1 Hp 3ph /AC |
| Coolant pump motor |
1 Hp |
| Coolant pump motor RPM |
2800 |
| Max. travel in mm |
700 |
| Min. travel automatic in mm |
2 |
| Power Supply |
415v 3phase/AC |
