| Technical Specifications |
Details |
| Confirmity to specification IS 6893 part 2 for Horizontal /Universal Knee Type Milling Machine |
Yes |
| Type of Milling |
Universal Milling |
| Table Total Area (Length x Width) (mm x mm) |
1520 x 310 |
| Automatic Lubrication to all slide |
Yes |
| Warranty in years |
1 |
| Erection And Commissioning Charges Included In Offered Prices Without Foundation |
Yes |
| Conformity to specification IS 6893 part 2 for Horizontal /Universal Knee Type Milling Machine |
Yes |
| Milling Arbor as per IS 8614 / DIN 6354 latest |
Yes |
| Mechanical Guarding as per IS 9474 latest |
Yes |
| Geometrical and Practical Accuracy as per IS 2200 latest |
Yes |
| Geometrical Accuracy test for inspection of the machine conforming to IS: 2201 – 1973 |
Yes |
| Machine standard As per IS: 210-1993 |
Yes |
| Type of Milling |
Universal Milling |
| Mechanism |
Manually Operated |
| Nature of Operation |
Medium Duty |
| Table Total Area (Length x Width) (mm x mm) |
1520 x 310 |
| Table Clamping Area (Length x Width ) , mm x mm |
1350 x 310 |
| Width of T slots in mm |
16 millimeter |
| Number of T Slots |
3 |
| Centre Distance between T slots in mm |
65 millimeter |
| Table Transverse |
Manual & Automatic |
| Longitudinal Table Transverse in mm |
800 millimeter |
| Cross Table Transverse in mm |
265 millimeter |
| Vertical Transverse in mm |
400 millimeter |
| Swivel of Milling Head to either side in vertical plan e for vertical milling in degree |
45 degree |
| Swivel of Table to either side of horizontal plane in Degree ( for universal Milling Machine) |
45 degree |
| Maximum Safe Load on table in KG |
250 Kilogram |
| Number of Spindle Speed |
18 |
| Spindle Speed range in rev/min |
35.5 -1800rpm |
| Spindle Front Bearing Diameter in mm |
85.725 millimeter |
| Type and Size of Spindle Nose |
ISO-40 |
| Number of Feeds available |
18 |
| Feed range for Longitudinal in mm/min |
16 -800 |
| Feed range for Transverse in mm/min |
16 -800 |
| Feed range for Vertical in mm/min |
4-200 |
| Rapid Transverse Feed range for Longitudinal & Cross in mm/min |
1 – 3200 |
| Rapid Transverse Feed range for vertical in mm/min |
1 – 800 |
| ISO Compliance for Milling Machine |
ISO 40 for Medium Duty Milling Machine |
| Size of Milling Arbor |
As per ISO 40 for Medium Duty Milling Machine |
| Power Supply (V, Ph , Hz) |
415v,3phase,50Hz |
| Spindle Motor Power in Kw |
5.5 Kilowatt |
| Spindle Motor RPM |
1500 |
| Feed Motor power in KW |
1.5 Kilowatt |
| Feed Motor RPM |
1500 |
| Coolant Pump motor in Kw |
0.11 Kilowatt |
| Noise level Emitted by Machine as per IS 10988 latest in dB |
80 |
| Interlocking through switches for Medium Duty and Heavy Duty |
Yes |
| Shear Pin or mechanical over load coupling for feed drive For medium duty and Heavy Duty |
Yes |
| Flexible Motor Coupling against shock loading For medium duty and Heavy Duty |
Yes |
| Thermal Safety Over Load Relay |
Yes |
| Interlocking of spindle & feed Drive For medium duty and Heavy Duty |
Yes |
| Control circuit switching off during Voltage drop |
Yes |
| Single phase preventer |
Yes |
| Positive clamping of all guide ways thru clamping p ads |
Yes |
| Streamlined construction, rigged and vibration free |
Yes |
| Power operated Feeds and Rapid traverse in all axis |
Yes |
| Independent main drive and feed drive |
Yes |
| Instantaneous braking of spindle and all Axis feed d rive for medium duty and heavy duty |
Yes |
| Inch push button for speed & feed drives |
Yes |
| Two nut arrangement with Climb Milling attachment for Longitudinal drive for medium duty and heavy d uty |
Yes |
| Feed & Rapid drive thru Electromagnetic clutch for Medium Duty and Heavy duty Milling Machine |
Yes |
| Separate plunger pump for spindle & feed drive lubrication for Medium Duty and Heavy Duty Milling Ma chine |
Yes |
| Automatic Lubrication to all slide |
Yes |
| Selection of Each Axis drive thru mechanical lever operated for Medium Duty and Heavy Duty Milling Machine |
Yes |
| Thermal Stability of bearing over excess temperature above 40 degree cel. |
Yes |
| Electric equipment |
Yes |
| Erection And Commissioning Charges Included In Offered Prices Without Foundation |
Yes |
| Machine casting of Column/Knee/Saddle /Table confirms to Cast Iron Grade FG-260 & Hardness 180- 230 BHN |
Yes |
| Main Spindle of C2R grade forged Steel and hardene d 58-62 HRC |
Yes |
| Drive gears of Alloy steel material specification 15 N i 7 Cr 4 M02 |
Yes |
| Pre-loaded Standard make High precision class P3 s et of taper roller bearings for main spindle |
Yes |
| Dynamically balanced Spindle and other parts rrotat ing with peripheral speed of more than 3m/sec |
Yes |
| Draw Bolt with draw nut |
Yes |
| Elevating crank handle |
Yes |
| Two arbor support bearing bracket for horizontal & U niversal milling |
Yes |
| Over arm brace for vertical/horizontal & Universal mi lling |
Yes |
| Machine Lamp |
Yes |
| Service Tool kit for operation & maintenance |
Yes |
| Operation & Maintenance Manual |
Yes |
| Foundation bolts & levelling plate |
Yes |
| Machine vice with swivel base 200 mm |
Yes |
| Self-Centering vice 10-80mm |
Yes |
| Stub Milling Arbor dia 16,22,27,32 &40 mm |
Yes |
| Collet Holder with set of conical collets size 5,6,8,10, 12,& 20mm |
Yes |
| End mill holders dia 5,6,8,10,16 & 20mm |
Yes |
| Reduction sleeve type B size MT1,MT2, MT3 &MT4 |
Yes |
| Milling Arbor for horizontal & Universal milling size di a 22x500 &, dia 27x500mm |
Yes |
| Universal dividing head 135mm with tailstock, suppo rting block,3 jaw self-centering chuck dia 160mm &tr ain of gears for Universal Milling Machine only for res t Put NA (For Simple, Compound and Differential Ind exing) |
Yes |
| Vertical Milling head (Swivel of Milling Head to either side in vertical plane for vertical milling should be 4 5 degrees) |
Yes |
| Set of spares for normal running |
Yes |
| Parking bracket |
Yes |
