MIG/MAG SYNERGIC PULSE INVERTER BASED WELDING MACHINE - SI-GMAW-400C
| TECHNICAL SPECIFICATION |
| Power Source Type | Digitally controlled IGBT Inverter based, Power source for MIG/MAG, Synergic MIG, Synergic Pulse/Double Pulse MIG welding |
| Input power supply | 400V, 3 phase, 50 Hz, 3/4/5 core cable |
| Max. DC Current rating at 10 min./40°C cycle time | 60% duty cycle - 400 Amp 100% duty cycle - 360 Amp |
| Class of Insulation | “H” Class |
| Wire feed unit | |
| Type of drive | 2/4 - Roll filler for wire feeder |
| Wire diameters sizes | 0.8 mm to 1.6 mm |
| Wire feed speed range | 1.0 to 25 m/min |
| Welding Gun | |
|
Type of cooling |
Air –cooled |
|
Wire diameters sizes |
0.8 mm to 1.6 mm |
|
Current rating |
450 Amps. at 60% duty cycle |
|
Max. Ambient temperature |
45° C |
|
Length of the cable |
5 meters |
|
Power Source |
|
| Open circuit voltage | 65 - 90 Volts |
| Output Current Range | 15A – 450A |
| Welding Voltage Range | 10V – 42V DC |
| Power factor | 0.90 |
| Type of enclosure | IP23 |
| Wire Feed Unit: | |
| Speed control | Digitally |
| Welding Gun | |
| Type of Cable | Armoured |
| Torch switch | 2T/4T |
| Inter connection cable | Power cable, Gas hose, Electrical Control Cable. |