INJECTION MOULDING MACHINE
| Technical Specification | |||
| MODEL | SI-IMM-75 | ||
| INJECTION UNIT | |||
| Unit | A | B | |
| Short Weight | ps | 65 | 75 |
| Screw Diameter | mm | 28 | 30 |
| Injection Pressure | bar | 1960 | 1840 |
| Injection Rate | cc/sec | 60 | 66 |
| L/D Ratio | L/D | 21 | 20.6 |
| Plasticizing Rate | gm/sec | 75 | 9.5 |
| Screw Stroke | mm | Max 110 | |
| Screw Speed | rpm | Max 350 | |
| Total Heating Capacity | kw | 5 | |
| System Pressure | bar | Max 150 | |
| CLAMPING UNIT | |||
| Clamping Tonnage | ton | Upto 50 | |
| Clamping Stroke | mm | Upto 250 | |
| Day Light | mm | Max 550 | |
| Mould Height | mm | 120-320 | |
| Size of Mould Platen | mm | Max 480 X 450 | |
| Tie Bar Distance | mm | Max 280 X 280 | |
| Tiebar Diameter | mm | Max 50 | |
| Locating Ring | mm | Max 90 | |
| Ejector Stroke | mm | Max 60 | |
| Ejector Force | ton | Max 2.1 | |
| OTHERS | |||
| Total Connected Load | Kw | 10.5 | |
| Servo Motor | Kw | Max 5.5 | |
| Oil Tank Capacity | Ltr | Upto 150 | |
| Machine Diamension (LXWXH) | meter | Max 3.5X1.2X1.7 | |
| Machine Weight Approx | Ton | Max 2.7 | |
| Hopper Capacity | Kg | Max 20 | |