| TECHNICAL SPECIFICATION |
| MODEL |
SI-ADTM-101 |
|
| Power Source |
Inverter Digital Technology GTAW AC DC Welder |
| Feature |
Description |
Value |
| Mains connection voltage |
3~ 50/60 Hz |
380...460 V ±10 % |
| Maximum supply current |
|
16...12 A |
| Fuse |
|
16 A or less |
| Open circuit voltage (average) |
MMA |
50 V |
| Rated maximum output at 40 °C |
40 % TIG |
300 A / 22 V |
| (Duty cycle and process specified in the next column) |
60 % TIG |
230 A / 19.2 V |
| 100 % TIG |
190 A / 17.6 V |
| 40 % MMA |
250 A / 30 V |
| 60 % MMA |
230 A / 29.2 V |
| 100 % MMA |
190 A / 27.6 V |
| Range of output |
TIG |
3 A / 1 V ... 300 A / 38 V |
| MMA |
10 A / 10 V ... 250 A / 39 V |
| Power factor, λ |
400 V, MMA 250 A / 30 V |
0.9 |
| Efficiency, ƞ |
400 V, MMA 190 A / 27.6 V |
86% |
| Idle power |
TIG |
20 W |
| Operating temperature range |
|
-20...+40 °C |
| Storage temperature range |
|
-20...+60 °C |
| EMC class |
|
A |
| Degree of protection |
|
IP23S |
| External dimensions |
L x W x H |
544 x 205 x 443 mm |
| Weight without accessories |
|
22.5 kg |
| Voltage supply for cooling unit |
Ucu |
380 -- 460 V |
| Recommended generator power (min) |
Sgen |
20 kVA |
| Wireless remote communication type for remote |
Transmitter frequency and power |
2.4 GHz Bluetooth, 2400-2483.5 MHz, 10 dBm |
| Wired communication type |
Analog |
Analog |
| Stick electrode diameters |
ø mm |
1.6 --- 4.0 mm |
| Standards |
IEC60974-1,-3,-1 ,IEC 61000-3-12 , AS 60974.1-2006 (3 |
| GB 15579.1 |
| Functions TIG |
TIG HF Start, TIG LIFT Start & TIG |
| Pre Flow |
0 to 10 Sec |
| Start Current Adjustment |
5 - 300% |
| Up Slope |
adjustable 0-5 Secs (Steps of 0.1sec); |
| Down Slope |
0.1 - 15 sec |
| Post Flow |
0 to 30 sec |
| Hot Start level |
- 80% to + 100% |
| Hot Start time |
0.1 sec to 9.9 sec |
| TIG Pulse Frequency |
0.2 hz to 300 Hz |
| Double Pulse Feature |
Yes |
| 2/4 stroke |
YES |
|
| Memories |
99 memory. |
|
| Parameter Value |
Value |
|
| Current mode |
DC-/ DC+ /AC/ MIX |
|
| AC Waveform |
Sine /Optima /Square |
|
| AC Frequency |
30 Hz ... 250 Hz |
|
| AC+ / AC- balance |
Min/Max = -60 %... 0 % |
|
| MIX TIG AC (time) ratio |
Min/Max = 10 %... 90 %,step 1 % |
|
| MIX TIG cycle time |
Min/Max = 0.1 s...1.0 s, step 0.1 s |
|
| MMA settings: |
|
| Hot start (Default = 0) |
-10 ... +10, step 1 |
|
| Arc force (Default = 0) |
-10 ... +10, step 1 |
|
| MMA antifreeze |
OFF / ON (Default= OFF) |
|
| VRD mode |
OFF / ON (Default= OFF) |
|
| Power Source |
|
| Error code display for maintenance purpose, Error diagnostic function available. |
| Auto cut off built in the power source in case of over current. Over heat, under voltage, phase absence |
| Protections, phase failure indicator provision. Suitable indication/alarm on the above failure provide. |
| Protection circuit for prevention of frequent failure of power device (IGBT) provided |
| It infinitely variable step less current control for the entire range of output current. |
| The machine support both TIG and MMA welding with AC/DC output having control feature of AC balancing and frequency control. |
| Pre-set wave form control in AC welding, Sine, square and optima wave form |
| The machine allows pulse welding at two current levels for better travel speed and lower heat input in dc tig mode. |
| Capable of micro tacking function controlling the tacking timing in the range of milliseconds (1- 200ms). |
| Capability to change the welding current during welding without extinguishing of the arc. |
| Compatible with Water Cooling unit |
| Display |
| DISPLAY Compatible with selection of material you are about to weld Fe / SS /AL and Compatible with Selection of Welded material thickness from 0.5mm to 10 mm and Compatible with selection of Joint Type:- Butt Joint / Corner Joint / edge Joint / Lap Joint / Fillet Joint / Tube Joint / Tube +Plate Joint and Compatible with selection of Joint Position:- PA /PB/PC/PD/PE/PF/PG |
|
| Cooling Unit |
Value |
| Connection voltage |
220...460 V AC, 1~/3~ |
| rated supply current |
1.0 A |
| Rated cooling power at 1 l/min |
0.9 kW |
| Cooling power at 1.6 l/min |
1.0 kW |
| Recommended coolant |
MPG 4456 |
| Coolant pressure (max) |
0.4 MPa |
|
| Tank volume |
3.0 l |
|
| Operating temperature range |
-20 ... +40 °C |
|
| Storage temperature range |
-20 ... +60 °C |
|
| EMC class |
A |
|
| Degree of protection |
IP23S |
|
| External dimensions |
(L) 615 x |(W) 206 x (H) 268 mm |
|
| Weight |
12.5 kg (approx. without accessories) |
|
| Standards |
IEC 60974-2, IEC 60974-10 |
|
