| MODEL |
SI-PD-13 |
SI-PD-20 |
| Drilling capacity in Steel mm |
13 |
20 |
| Drilling capacity in Cast Iron mm |
13 |
20 |
| Drive |
Belt Drive & Gear Drive |
Belt Drive & Gear Drive |
| Tapping Capacity in mm |
10 |
15 |
| Spindle Travel |
Manual & Automatic |
Manual & Automatic |
| Machine Vice Arrangement |
Fixed Base & Swivel Base |
Fixed Base & Swivel Base |
| No of feed |
0 |
0 |
| Pillar length , (mm) |
390 |
1145 |
| Pillar Diameter (mm) |
100 |
100 |
| Cutting Speed (m per min) |
10 |
12 |
| Type of Feed |
Automatic feed & Manual Feed |
Automatic feed & Manual Feed |
| Feed (mm per rev) |
0 |
0 |
| Motor Output (hP) |
0.5 |
1 |
| Noise Emitted by Machine (dB) |
60 |
|
| Power Supply V, Ph, Hz |
3 Phase 415v 50hz |
3 Phase 415v 50hz |
| Clamping Area (length x width) (mm x mm ) |
200 |
325 |
| Taper in Spindle Bore |
MT-2 |
MT-2 |
| Range of Spindle Speed |
640-1040 |
640-1040 |
| Nominal Size of T Slots |
10 |
14 |
| Output of Coolant Pump (Kw) |
0.5 |
1 |
| Type of Lubrication |
Manual |
Manual |
| Speed of motor for coolant pump in rpm |
600 |
1440 |
