CONVENTIONAL LATHE MACHINE


                                      TECHNICAL SPECIFICATION 
Capacity  
Swing over machine bed 400 mm
Swing over cross slide 200 mm
Swing over gap 450 mm
Distance between centers 750 mm
Centre Distance 700 mm
Width of bed 250 mm
Height for centres 200 mm
Longitudinal Travel 600 mm
Accuracy  
Spindle run out at nose 0.005mm
Parallelity of bed with respect to spindle axis 0.01 per 300 mm
perpendicularity of cross slide with respect to spindle axis 0.01mm per 300 mm
WORK SPINDLE  
Spindle bore 42 mm
Spindle Taper bore MT-4
Type & size of spindle nose (ASA) A 2-5 / CAM Lock D1-5 / Better
Spindle Power 4Kw
Range of Spindle Speed rpm / No. of speed 40 – 2000 rpm / 8 No.

 

 

                                      TECHNICAL SPECIFICATION 
CARRIAGE
Cross Slide Travel 200 mm
Top slide Travel 90 mm
TOOL POST  
Four Way Tool Post 20X20 mm
TAIL STOCK WITH HAND WHEEL  
Stroke of quill /SpindIe Travel 150 mm
Taper socket/Taper of sleeve MT4
Tail Stock Barrel diameter / Quill diameter 50 mm
DRIVE  
No. of feeds 24
Feed range (Longitudinal) 0.04 -1.5 mm/rev
Feed range (cross) 0.02 to 0.35
THREAD PITCHES WITH STANDARD CHANGE GEAR SET  
BS threads 4 - 56 T.P.I
All standardized metric threads 0.3 - 6 mm
Lead screw diameter 30 mm
Lead screw pitch 6 mm/4 TPI
Motor Power 4.0 KW

 

                                      TECHNICAL SPECIFICATION 
Features & Accessories :
→ 0.25 HP Rajmani Coolant pump with 90 liter coolant tank → Fixed Machine centres → Thread chaser dial → Square Tool Post → Chip collecting tray → Oil Can → Allen keys & Spaneers → Metric gears/Inch Gears → Machine Break and Foot Brake → Machine Lamp → Three Jaw Chuck diameter 200mm → Four Jaw Chuck diameter 250mm → Collet chuck & collets → Main switch and control panel → Machine Sleeves. → Face Plate →Anti Vibration Pad → Arrangement for engagement and disengagement of power feed → Safety clutch for feed over load → Universal gear box provided for wide range of Inch/Metric threads & feeds → Shear pin coupling as an over load safety device for lead screw → Gap bed Lathe of Casting and Flame hardened and ground with Brinell Hardness over 300 BHN→ Drive plate for carrie → Quick change tool post → Splash guard → Chuck Guard → Follow rest → Steady rest → Lathe carriers → Revolving centres → Manuals