VERTICAL MILLING MACHINE
| TECHNICAL SPECIFICATION | |
| Table size (Minimum) | 1000 X 225 mm |
| Automatic Longitudinal Travel | 550mm |
| Automatic Transverse Travel | 230mm |
| Vertical Travel | 350mm |
| T- Slot | 14 mm |
| Table loading capacity (Minimum) | 170 Kg |
| Feed | |
| Nos. of Feeds | 16 |
| Feed Range | |
| Longitudinal Feed Range | 25-800 mm/min |
| Transverse Feed Range | 25-800 mm/min |
| Rapid Transverse | |
| Min Longitudinal | 2000 mm/min |
| Feed Motor (Minimum) | 0.75 kw |
| Machine Spindle & Head stock: | |
| Quill Stroke, Manual (Minimum) | 60 mm |
| Spindle nose taper | As per ISO40 |
| TECHNICAL SPECIFICATION | |
| Vertical Milling Head Swiveling to both side | 45 degrees |
| Spindle speed Range | 40 - 1800 RPM |
| Spindle Motor | 3 kw |
| No. of speeds | 10 no. |
| Coolant System | Coolant Tank with coolant pump & Swart Tray |
| Accuracy : | |
|
→ Minimum Least count in Longitudinal, cross slide & Vertical 0.05 mm → Squareness & Straightness of the Vertical Movement of the Knee to the table surface 0.02 mm/300 mm → Squareness & Straightness of the Vertical Movement of the Knee to the table surface 0.02 mm/300 mm →Flatness of the Table Sufrace 0.04 upto 1000 mm →True Running of the Taper Bore of the Spindle a) Near the spindle Nose ---0.01mm b) at a Distance l., I =200 mm----0.02mm |
|
| Accessories & General Features : | |
| →Magnetic clutch brake for Spindle motor and feed motor→ Hardened and ground guide ways → Rigid casting body with sufficient ribs for vibration free operation. → All gears and shafts hardened and ground → Indexing Head Attachment with gear set. Provision for connecting Indexing Head with X-Axis Lead screw → Machine Lamp → Anti-Vibration Pads → Clamping Kits for clamping job height upto 100mm → Parallel bars (20,30,40mm) → Centralized lubrication system → Milling Vice With Swivel Base → Manuals | |