HIGH PRECISION SURFACE GRINDING MACHINE
| TECHNICAL SPECIFICATION | |
| TYPE | Precision Surface Grinding Machine |
| Capacity | |
| Table Size | 600X300 mm. |
| T-Slot Size | 14 mm |
| Longitudinal Table Travel | 700 mm |
| Cross Table / wheel Head Travel | 325 mm |
| Distance Betweeen Spindle Center to Table Top | 550 mm |
| Load on Table | 300 Kg |
| FEED | |
| Longitudinal Table Speed | 5-25 m/min |
| Cross Feed Rate at each reversal per stroke | 1 - 5mm |
| Cross Movement Least Count | 0.02 mm |
| Vertical Movement Least Count | 0.001 mm |
| Auto Down Feed Increment | 0.001-0.02 mm |
| WHEEL HEAD | |
| Size of grinding wheel | 355 x 38 x 127 mm |
| Power of wheel head motor | 3.7 Kw |
| Speed of wheel spindle | 1400 RPM |
| Vertical Travel Speed | 300 mm/min |
| Cross Movement Least Count | 0.02 mm |
| Vertical Movement Least Count | 0.001 mm |
| Auto Down Feed Increment | 0.001-0.02 mm |
| WHEEL HEAD | |
| Size of grinding wheel | 355 x 38 x 127 mm |
| Power of wheel head motor | 3.7 Kw |
| Speed of wheel spindle | 1400 RPM |
| Vertical Travel Speed | 1400 RPM |
| TECHNICAL SPECIFICATION | |
| ACCURACY | |
| Squarenes of each axis with respect to other axis | 0.02/300 mm |
| Run out at spindle nose | 0.005 mm |
| Longitudinal and Cross movement | Hydraulic Power |
| COOLANT UNIT | 0.19 Kw Coolant Motor with Paper filter unit & Magnetic Separator |
| Features & Accessories : | |
| → Oil leak proof design → sensor / limit switch for axis over travel safety → Flash Guards for Coolant → Programmable DRO or CNC controller for complete grinding cycle → Control Panel→ Turcite B coated Slide Ways → Auto Lubrication at all moving parts. → High precision Cartridge type spindle with Permanently lubricated angular contact preloaded ball bearings. → Electronic Hand Wheel for Y & Z axis movement → Linear glass scale in Y & Z axis → Vibrations free rigid casting. → Compound Table Design with column fixed to the bed. → Wheel Flange → Wheel Balancing Stand with mandrel→ Wheel Dressing Attachment→ Electro Magnetic Table Covering Full Length of stroke. →Precision Angle Plate 250x250 mm →Machine Lamp → Leveling Pad → Wheel Extractor → SPARES → Grinding Wheel → Manuals | |