| Model : SI-RD-25 |
| Material which can be drill |
Steel,Cast Iron,Aluminimum,Copper,Nylon |
| Type of Bed * |
Flat type |
| Feed Range in mm/rev |
0.125 - 1.25 |
| Number of feed |
6 |
| Number of Spindle speed |
8 |
| Taper in Spindle |
MT 3 |
| Range of Spindle Speed in Forward Direction in rev/min |
8-1000 |
| Main Motor Power in kW |
2 |
| Arm motor power in kW |
0.75 |
| Type of Cooling |
Fluid cooling |
| Power supply |
Three Phase Supply (415 V, 50 Hz) |
| Coolant Pump output in kw |
0.11 |
| Tapping in steel - metric fine threads |
M20 |
| Type of Lubrication |
Oil recirculating |
| Taping in cast Iron |
M30 |
| Maximum Drill Diameter for steel in mm |
25 |
| Maximum Drill Diameter for cast iron in mm |
32 |
| Maximum Drill Diameter for non ferrous material in mm |
50 |
| Maximum Quill Traverse in mm |
200 |
| Column Sleeve Diameter in mm |
200 |
| Width of Arm Guide Ways in mm |
150 |
| Maximum Drilling Radius in mm |
1200 |
| Minimum Drilling Radius in mm |
500 |
| Maximum Length of Bed in mm |
650 |
| Maximum Width of Bed in mm |
200 |
| Maximum Drill head traverse in |
750 |
| Arm Traverse in mm |
450 |
| Spindle travel (drilling depth) in mm |
200 |
| Maximum Distance from Base plate to spindle in mm |
970 |
| Minimum distance from Base plate to spindle in mm |
300 |
| Travel of Sleeve in mm |
250 |
| Lead Screw Diameter in mm |
25 |
| Lead Screw Pitch in mm |
6 |
