| MODEL |
SI-HSPL-245 |
| Centre Height |
245mm |
| Swing Over machine bed |
500mm |
| Swing Over cross slide |
270mm |
| Distance between the centers |
1250mm |
| Travel of Cross slide |
300mm |
| Travel of Top slide |
130mm |
| Type of spindle |
A2-6 Metric 60 |
| Max. Torque |
850 Nm |
| Type of Spindle Nose |
A2-6 Cam lock D6 |
| Taper Bore in Spindle |
Metric 60 As per IS 2582- 1972 |
| Taper Bore in Spindle sleeve |
MT – 4 As per IS 1715-1986 |
| Bore in spindle |
53 mm |
| Chuck |
3 Jaw self centered chuck |
| Graduation of longitudinal scale on apron box hand wheel |
0.1 mm |
| Graduation of scale on cross slide spindle |
0.1 mm |
| Graduation of scale on compound slide spindle |
0.1 mm |
| Type of tool holder |
Quick change tool post |
| Tool shank size |
25 mm X 25 mm as IS 1983:1958 |
| Stock of quill |
≥180 mm |
| Diameter of Centre sleeve |
≥45 mm |
| Tail stock Spindle Taper |
MT 5 as per IS 1715:1986 |
| Longitudinal Feed |
36 ,0.8 mm/rev0.05-2.8mm |
| Module Thread range in MOD |
33 , 0.2 – 12 MOD |
| Metric Thread range in mm |
36 , 0.4 – 24 mm |
| British thread range in TPI |
35, 1 – 48 |
| DP Thread range in DP |
29, 2 – 96 DP |
| Drive |
Gear Drive |
| No. of Spindle speed in forward direction |
12 |
| No. of Spindle speed in reverse direction |
6 |
| Spindle speed range in forward direction |
45 – 2000 RPM |
| Spindle speed range in reverse direction |
45 – 2000 RPM |
| Main motor power |
7.5 Kw minimum |
| Electric Equipment i.e. Motor |
Electric Equipment i.e. Motor and control gear suitable for operation on 415 V, 3 phase, 50 Hz 4 wire A.C. supply with suitable Ammeter |
| Coolant pump output |
As per IS 2161:1962 :0.1 Kw – 0.13 Kwa |
| Coolant pump speed in Rev/min |
2800 rev/min |
| Coolant pump discharge at maximum working height (L/min) |
20 L/min |
| Lubrication system |
Lubrication system is required as per IS11118 |
| Type of lubrication |
oil sump Lubrication |
| 4-jaw independent hollow high speed chuck Ø250mm (SECO make) |
1 No |
| 3-jaw self-centering hollow high speed chuck Ø250mm (SECO make) |
1 No |
| Machine lamp. |
1 No |
| Longitudinal stop. |
1 No |
| Stop roll. |
1 No |
| MT-5 Revolving centre |
1 No |
| Cam lock D 6 Spindle |
1 No |
| CNMG DCLNL 2525 M12 with insert 5 set |
3 No |
| Inserted Parting Tool with insert 5 set |
3 No |
| Inserted External Threading Tool with insert 5 set |
1 No |
| Inserted Internal Threading Tool with insert 5 set |
1 No |
| Inserted Boring Tool ø12 with insert 5 set |
1 No |
| Inserted Boring Tool ø16 with insert 5 set |
1 No |
| Inserted Boring Tool ø32 with insert 5 set |
1 No |
| DDJNL 2525 M16 with insert 5 set |
1 No |
| Drill Bit Grinder machine with specifications of:-Grinding Range: 3 to 13mm, Power: AC220V/180W,Point Angle: 100° (95°)-135°, Speed:4400RPM,Grinding Wheel: CBN (HSS) and SDC(Carbide),Standard 11 collets: 3m to 13mm. |
1 No |
| MT3 Shaft Arbor with Taper Shank Keyless Drill Chuck ø1- ø13mm |
1 No |
| HSS straight shank Drill Bit ø1- ø13mm (0.5mm variation) 25 pieces set |
2 No |
| Metal cutting oil |
60 Liters |
| 4-jaw independent hollow high speed chuck Ø250mm (SECO make) |
1 No |
| 3-jaw self-centering hollow high speed chuck Ø250mm (SECO make) |
1 No |
| Machine lamp. |
1 No |
| Longitudinal stop. |
1 No |
| Stop roll. |
1 No |
| MT-5 Revolving centre |
1 No |
| Cam lock D 6 Spindle |
1 No |
| CNMG DCLNL 2525 M12 with insert 5 set |
3 No |
| Inserted Parting Tool with insert 5 set |
3 No |
| Inserted External Threading Tool with insert 5 set |
1 No |
| Inserted Internal Threading Tool with insert 5 set |
1 No |
| Inserted Boring Tool ø12 with insert 5 set |
1 No |
| Inserted Boring Tool ø16 with insert 5 set |
1 No |
| Inserted Boring Tool ø32 with insert 5 set |
1 No |
| DDJNL 2525 M16 with insert 5 set |
1 No |
| Drill Bit Grinder machine with specifications of:-Grinding Range: 3 to 13mm, Power: AC220V/180W,Point Angle: 100° (95°)-135°, Speed:4400RPM,Grinding Wheel: CBN (HSS) and SDC(Carbide),Standard 11 collets: 3m to 13mm. |
1 No |
| MT3 Shaft Arbor with Taper Shank Keyless Drill Chuck ø1- ø13mm |
1 No |
| HSS straight shank Drill Bit ø1- ø13mm (0.5mm variation) 25 pieces set |
2 No |
| Metal cutting oil |
60 Liters |
