MODEL
|
SI-UGM-1050
|
| Working Space |
1050 x 250mm |
| T Slot |
3 Nos. |
| Width of T Slot |
15mm |
| Pitch of T-Slot |
62mm |
| Spindle Centre to underside of Over support Distance |
125mm |
| Longitudinal Feed |
600mm |
| Cross Feed |
230mm |
| Vertical Feed |
450mm |
| Arbour |
25.4mm |
| Spindle Bore |
ISO – 40 |
| Milling Spindle |
|
| Number of Spindle Speed and Range |
6 Nos. (50,85,110,240,350,525 rpm) |
| Number of Feeds |
3 Feeds (0.9, 1.4, 2.25 per Minute) |
| Electrical |
|
| Main drive electric motor |
2 HP and 1440 rpm |
| Coolant Motor |
0.11 HP and 2700 rpm |
| Coolant Tank Capacity |
20 ltrs |
| Alloy steel materials (15 Ni 7 Cr 4 M02) drive gears |
| Main spindle - C2R grade forged steel, hardened (58-62 HRC) |
| Dynamically balanced spindle and other parts rotating with peripheral speed of more than 3m/sec. |
| Coolant (40ltrs) |
| Manuals |
| Tools |
| Machine lamp |
| Coolant equipment with tray |
| All Electrical fittings with motor, switch, wiring, V-belts |
| Draw Bolt with Draw Nut |
| Elevating Crank Handle |
| Dation bolts |
| Foundation bolts |
| Collet Holder with set of conical collects size 5/6/8/10/12&20mm |
| End mill holders diameter 5/6/8/10/16 & 20mm |
| Reduction sleeve type B size MT1/MT2/MT3 & MT4 |
| Vertical Milling Head |
